Seitenleiste


Access to information is restricted depending on your login. Request login-information through our contact form.

service:software:bootloader:bootloader_pxa255

Bootloader Trizeps-II/III (PXA255)

If you want to update the bootloader with JTAG, use the .rom-files.
If you want to update with the bootloader itself, use .tft-files.

View the serial-number-sticker for speed-grade and SDRAM information.
Example:
11203 400R64F16 references 400MHz and 64MB SDRAM

View to decide which file matches:

Downloads

Release Notes:

128MB SDRAM 400MHz:

128MB SDRAM 300 MHz:

128MB SDRAM 200 MHz:

64MB SDRAM, 400 MHz:

64MB SDRAM 300 MHz:

64MB SDRAM 200 MHz:

Bootload.000

Bootload.000 is needed if only the uLoader was burned to flash:

To burn a complete bootloader copy:

  • a matching bootloader .tft-file (see above).
  • and a autoboot.bat with following contents:
mmc_boot mt664.tft

to a SD-Card.

Insert the SD-Card and turn the device on.
Wait until the new Bootloader got burned (See output on COM1: 38k4 8n1).

service/software/bootloader/bootloader_pxa255.txt · Zuletzt geändert: 2015/08/05 11:25 von