Application Notes

This section contains application notes to the Keith & Koep hardware. Some documents are restricted to customers who bought a support-level.

Porting Guide: Trizeps4 -> Trizeps4M

• JTAG
• Connect a SD/SDIO/MMC-Card-Socket to a Trizeps
• Connect a Display to a Trizeps
• Connect a UART/RS232/IrDA to a Trizeps
• Connect USB-Host-Connector to a Trizeps
• Connect USB-Slave-Connector to a Trizeps
• connectaudio
• Connect to Ethernet
• Connect a 4-wire Touch to a Trizeps
• Connect a 5-Wire Touch Panel to the Trizeps 4-wire Touch Controller
• JTAG Support for Trizeps Modules
• JTAG CPLD Programming
• Connect an Exar Quad/Octal Uart

• Connect a LVDS Display to a Trizeps
• connectsja1000
• Connect a Realtime-Clock to a Trizeps

• Connect Analog Video Input to a Trizeps