service:hardware:imod:imod

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu dieser Vergleichsansicht

Both sides previous revision Vorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
service:hardware:imod:imod [2018/08/10 16:06]
service:hardware:imod:imod [2018/08/10 16:17] (aktuell)
Zeile 1: Zeile 1:
 ====== i-MOD ====== ====== i-MOD ======
  
-Keith & Koep developed the iMod standard to ease the extension of baseboard functionality.\\+Keith & Koep developed the i-MOD standard to ease the extension of baseboard functionality.\\
 Reusing the same extension connectors on multiple [[service:​hardware:​baseboard:​baseboard|Keith & Koep baseboards]] will allow customers to select between a variety of extension boards.\\ Reusing the same extension connectors on multiple [[service:​hardware:​baseboard:​baseboard|Keith & Koep baseboards]] will allow customers to select between a variety of extension boards.\\
 Customers may select to build their own extension, which can be reused with our baseboards. Customers may select to build their own extension, which can be reused with our baseboards.
  
 ===== i-MOD Interface 10pin FCC ===== ===== i-MOD Interface 10pin FCC =====
-The iMod interface connector uses a 10pin 0.5mm pitch flat-cable-connector.\\+The i-MOD interface connector uses a 10pin 0.5mm pitch flat-cable-connector.\\
 One idea is to reuse the same connector for different interfaces.\\ One idea is to reuse the same connector for different interfaces.\\
 The basic pinning is such (seen from the view of the baseboard): The basic pinning is such (seen from the view of the baseboard):
service/hardware/imod/imod.1533909979.txt.gz · Zuletzt geändert: 2018/08/10 16:06 von