The Trizeps II-270 can be used as a replacement or upgrade of older Trizeps-I and Trizeps-II Type Modules like Trizeps II Classic, Trizeps II K3, Trizeps II FX. Note: As it depends on the PXA270 Processor, the existing OS-Images for the Trizeps-I or Trizeps II platforms must be recompiled.

• XScale PXA270 processor(312-624MHz)
• Max. 64 MByte NOR-Flash
• Max. 128 MByte SDRAM
• LCD-controller 16 Bit VGA or 8 Bit SVGA
• 4-wire touch
• AC97 Audio-Codec: Mic, Line-In, Headphone
• PCMCIA/CompactFlash
• SD/MMC (1 Slot on Board)
• GPIO
• 3xUART
• I2C
• USB Host/Device Controller

The Trizeps II-270 fits into following Keith & Koep products:

• MT6N

• Bootloader Trizeps IV (PXA270)
• BSP for Trizeps IV

• XScale PXA255 processor(400MHz)
• Max. 64 MByte NOR-Flash
• Max. 128 MByte SDRAM
• LCD-controller 16 Bit VGA or 8 Bit SVGA
• 4-wire touch
• AC97 Audio-Codec: Mic, Line-In, Headphone
• PCMCIA/CompactFlash
• SD/MMC
• GPIO
• 3xUART
• I2C
• USB Device Controller

• Change Notice CODEC 20130213_pcn_codec.pdf
• Datasheet Trizeps II Classic: Trizeps-II Classic.pdf
  
• Datasheet Trizeps II K3: triz-ii-k3-01.pdf Obsolete!
  
• Datasheet Trizeps II FX: trizeps-ii-fx-21.11.07.pdf
• Datasheet Trizeps II-270M trizeps-ii-270-10_11.pdf

• Bootloader Trizeps-II/III (PXA255)
• BSP for Trizeps II

• 3D Model (stl) trizeps2-j3.stl.zip
• 3D Model (step) trizeps2-j3.stp.zip
• 3D Model (iges) trizeps2-j3.igs.zip
• 3D Model (rhino) trizeps2-j3.3dm.zip