Seitenleiste


Access to information is restricted depending on your login. Request login-information through our contact form.

service:hardware:module:trizeps8plus:trizeps8plus

Dies ist eine alte Version des Dokuments!


Trizeps VIII Plus

Trizeps VIII Plus Product Page
Current Version: Prototype - Trizeps VIII Plus V1R1

!!! PRELIMINARY INFORMATION !!!

Technical Documents

Datasheet / Datenblatt:

PCNs (Product Change Notifications)

Currently no notifications




3D Models

3D data:
Important note: Please read the 3D data disclaimer contained in the zip file.

Description

The Trizeps VIII Plus is powered by NXP i.MX 8M Plus processor, which is designed to meet the latest market requirements of connected streaming audio/video devices, scanning/imaging devices and various devices demanding high-performance and low-power. It offers a 2.3 TOP/s Neural Processing Unit (NPU) for AI-applications like pattern, object and speech recognition.

The i.MX 8M Plus family of processors features advanced implementation of a quad ARM® Cortex®-A53 core, which operates at speeds of up to 1.8GHz (consumer version) and 1.6GHz (industrial version). A general purpose Cortex®-M7 core processor is for low-power processing. A 32-bit LPDDR4 is used for memory. There are a number of other i.MX 8M Plus interfaces for connecting peripherals, such as displays, cameras, GPS and sensors, which are extended by components already available on the module:

  • a stereo, hi-fi quality audio-codec.
  • a FPGA with up to 4300 LUT to convert MIPI-DSI to parallel 24bpp display data and for user defined programmable logic.
  • a programmable Cortex-M0 Kinetis MCU, capable of realtime processing, reading multiple 16bit analog inputs or usable as resistive touch-controller.
  • WLAN 802.11 a/b/g/n/ac and Bluetooth 4.2 / 5 module

The Trizeps VIII Plus module got a SODIMM200 card edge connector and a 60pin FX11 high-speed board connector. The pinning of both connectors is to a large extent compatible to previous Trizeps modules.

Difference to Trizeps VIII

The i.MX 8M Plus processor of Trizeps VIII Plus benefits from advanced 14nm LPC FinFET Technology, which allows for lesser power-consumption and higher operating frequencies than the i.MX8 used on Trizeps VIII.

The Trizeps VIII offers:

  • support of 4K displays

It misses following features:

  • 2.3 TOP/s NPU (Neural Processing Unit)
  • 2x CAN
  • second Ethernet-MAC
  • third SDIO-port routed to SODIMM

Difference to Trizeps VIII Mini

The i.MX 8M Mini processor of Trizeps VIII Mini can be considered as the predecessor to the i.MX 8M Plus processor used on Trizeps VIII Plus.

The Trizeps VIII Mini lacks some of the interfaces:

  • 2.3 TOP/s NPU (Neural Processing Unit)
  • 2x CAN
  • second Ethernet-MAC
  • third SDIO-port routed to SODIMM
  • HDMI
  • multi-display support: only MIPI-DSI or LVDS may be used at the same time.
  • only USB2.0, instead of USB3.0 ports.

Block Diagram


Software

Application Notes

Test-Reports and Certificates:

Baseboard & Panels

The Trizeps VIII Plus fits into following Keith & Koep products:

Power Consumption

Cookies helfen bei der Bereitstellung von Inhalten. Durch die Nutzung dieser Seiten erklären Sie sich damit einverstanden, dass Cookies auf Ihrem Rechner gespeichert werden. Weitere Information
service/hardware/module/trizeps8plus/trizeps8plus.1612789690.txt.gz · Zuletzt geändert: 2021/02/08 14:08 von