Seitenleiste


Access to information is restricted depending on your login. Request login-information through our contact form.

service:hardware:panel:ipant10cl

i-PAN T10 CoverLens

Product page

The i-PAN T10 Baseboard is designed for a direct installation on a 10.1” capacitive touch Display (resolution 1280 x 800 pixel, brightness 420 cd/qm, 3.0 mm glass front). It features most peripherals needed by today’s industrial panel-applications and because of that is an ideal basis for customized flat panel PC solutions. It is sold in combination with a 10.1” display and different CPU-modules and housing options. Housing options range from simple (glued to back of the display), open metal mounting frame and to a complete closed metal housing. It is designed to be a low-cost solution of the i-PAN XT-Pro 10. Typical a Trizeps VII with NXP i.MX 6 processor is used as CPU-module.
It got iMod flex-cable-connectors and solder-pads to extend the board functionality and connect to Keith&Koep iMod-Adapters and customers peripherals.



Front- and Backside



Figure: Simplified Block Diagram i-PAN T10 CoverLens baseboard


The i-PAN T10 CoverLens features:

  • Intelligent Panel solution
  • Based on Trizeps CPU modules with SODIMM200 technology
  • 10inch display with coverlens.
  • capacitive touch
  • USB2.0 host
  • uSD card socket.
  • RJ45 10/100Mbit Ethernet with POE option.
  • iMod extension connectors with USB,I2C,CAN and GPIOs.

Operating System for i-PAN T10 CoverLens

Currently we support Windows Embedded Compact 7, Windows Compact 2013, Linux and Android as operating system.
Board Support Packages (BSP) are free for download and allow our customers to built their own OS.

Because the i-PAN T10 CoverLens may be equipped with different Modules, use the following links in the Modules-chapter to get OS-Images and the Board-Support-Package.

Modules

This panel may be equipped with one of the following modules:

Technical Documents

3D Models (no warranty)

  • STEP:
  • STL:
  • PDF:

Note

After the panel is mounted, it may be needed to do a one-time calibration of the touch-screen.
In Windows Embedded Compact this can be done by running:

i2c.exe b8 3a 03

from the command-line. During this procedure, the screen should not be touched!


Summary new i-PAN touchpanel solutions

Cookies helfen bei der Bereitstellung von Inhalten. Durch die Nutzung dieser Seiten erklären Sie sich damit einverstanden, dass Cookies auf Ihrem Rechner gespeichert werden. Weitere Information
service/hardware/panel/ipant10cl.txt · Zuletzt geändert: 2017/09/08 11:19 von