Building a Windows Embedded CE7 Debug Image for Trizeps7 with the Keith & Koep Device Catalog

This application note will guide you through the steps needed, to create an own Windows Embedded CE 7 image.

• Start Visual Studio 2008 and select File –> New Project..
  

• PlatformBuilder→Osdesign
• BoardSupportPackages→ Trizeps7:ARMv7
• DesignTemplate → Keith & Koep GmbH Evalkit Device → Choose a template

• Catalog Items View → Third Party → BSP → Trizeps7: ARMV7 → Choose device drivers

• Solution→Trizeps7 ARMV7 Debug

• Device: (auto)Ether to debug over Ethernet

• Project→Properties

• Build→Build Solution
• Build→Open Release Directory in Build Window
• cd makeSD
• Copy the built image on SD-Card with the batches BurnSDonS.bat or FormatSDonS.bat (first deploy). Mount the SD-Card as drive S: in your system before.

• Now you have a prepared SD-Card for your Trizeps7 device.

• Connect your Trizeps7 device and PC with a serial cable
• Open an Terminal on your PC with 38400baud
• Start your Trizeps7 device and press ESC when you see the loading bar
• Select the following settings in the bootloader

• Start the downloading process by pressing D

• Connect device

• The image should download now and starts up
• If the image stops you can continue it with the green start button