Seitenleiste


Access to information is restricted depending on your login. Request login-information through our contact form.

service:wince:demos:canmonitor_ipan4

CAN Monitor (iPan4, Trizeps MX28, Trizeps VII)

It works with iPan4, Trizeps MX28 and Trizeps VII and requires .NET Compact Framework 2.0 and Windows CE 5.0 or later.

CAN Tabpage

  • connect to the CAN1 or CAN2 device with selected UseBaudrate
  • change the CAN device with new connect after a disconnect
  • change the baudrate with UseBaudrate and Set Baudrate
  • the message counter shows how many messages have been arrived and have been sent

Send Tabpage

  • transmitt CAN messages using the transmit button
  • display the Status of the last transmit

Receive Tabpage

  • show received CAN messages inside the list box (WARNING in this demo it may not be displayed all reveived messages)
  • set the acceptence code register and acceptence mask register to filter CAN messages
  • selecting the echo checkbox makes CanMonitor echo messages
  • the second checkbox let CanMonitor increment the packet content

Note these archives are for MX28 only:
Download Binary: canmonitor_ipan4_binary.zip
Download Source: canmonitor_ipan4_source.zip

Can Support for i.MX6 Trizeps-VII:
Can Demo Applications for iMX6

Cookies helfen bei der Bereitstellung von Inhalten. Durch die Nutzung dieser Seiten erklären Sie sich damit einverstanden, dass Cookies auf Ihrem Rechner gespeichert werden. Weitere Information
service/wince/demos/canmonitor_ipan4.txt · Zuletzt geändert: 2014/04/17 11:47 von