Seitenleiste


Access to information is restricted depending on your login. Request login-information through our contact form.

service:winiot:appnotepub:deployimage

How to deploy a Win IoT Core Image

Myon

Prepare System
  • Download the DragonBoard Update Tool x86 or x64
  • Install the DragonBoard Update Tool and allow to install the contain USB driver
Prepare Hardware (iPAN M7)

  • Set Forced_USB_Boot (SW201) to “on”. (marked with 6)
  • Connect a USB cable to the i-PAN M7 micro USB-Slave port and connect the other end to an USB-port on the host PC. (marked with 4)
  • Connect a power-supply to the i-PAN M7 board (marked with 1)
Deploy Image
  • Start the DragonBoard Update Tool.
  • The Update Tool should detect the i-PAN M7 and the Connection Status should turn green.
  • Select the “Browse” button and select the rawprogram0.xml. When this file does not exist you can create it when you select the Flash.ffu and click on „Program“.
  • Press the “Program” button and wait for the image to be stored onto the eMMC of the Myon.
Start Hardware
  • Once download is complete, disconnect the power supply and micro-USB cable from the board and switch Forced_USB_Boot (SW201) back to “off”. Set Boot_Config_1 (SW200) to “off” to ensure boot from eMMC. If no card is inserted to the µSD-card socket, it would make no difference if Boot_Config_1 is set or not.

Update Single Partitions on emmc

Please use this method only to test single components. You need the follwing tools:

  • emmcdl.exe (part of the DragonBoardUpdateTool)
  • prog_emmc_firehose_8916_ddr.mbn (Part of the DragonBoardUpdateTool)
  • cpfatfs.exe (part of the KuKMyonBuildEnvironment [KUK_SRC\acpi\bin])

To update a partition you need to start the Myon to USBDownloadMode. With „emmcdl -list“ you get the Right com port.

Update SBL

emmcdl -p COMxx -f prog_emmc_firehose_8916_ddr.mbn -b SBL sblfile.mbn

Update UEFI

emmcdl -p COMxx -f prog_emmc_firehose_8916_ddr.mbn -b UEFI uefifile.mbn

Update ACPI

Add need files to the fat16.bin file from ACPI build folder:

cpfatfs.exe fat16.bin panelcfg.xml

cpfatfs.exe fat16.bin boot1.bmp

cpfatfs.exe fat16.bin boot2.bmp

cpfatfs.exe fat16.bin SMBIOS SMBIOS.CFG

emmcdl -p COMxx -f prog_emmc_firehose_8916_ddr.mbn -b PLAT fat16.bin

Trizeps7 (SDCard)

  • insert SDCard and get the physical disk number: (CommandPrompt(as administrator) diskpart.exe then list disk)
  • flash the SDCard (dism.exe /Apply-Image /ImageFile:„Trizeps7TestOEMInput.xml.Debug.ffu“ /ApplyDrive:\\.\PhysicalDriveXXX /SkipPlatformCheck)
  • the first boot is very slow and take much time
Cookies helfen bei der Bereitstellung von Inhalten. Durch die Nutzung dieser Seiten erklären Sie sich damit einverstanden, dass Cookies auf Ihrem Rechner gespeichert werden. Weitere Information
service/winiot/appnotepub/deployimage.txt · Zuletzt geändert: 2019/01/15 20:27 von