Seitenleiste


Access to information is restricted depending on your login. Request login-information through our contact form.

service:winiot:bsp

BSP for Myon

Windows 10 IoT Core

Windows 10 IOT Core Myon Build Environment

copy the KuK_Myon_BuildEnvironment folder to your RootFolder.

install the ADK in version 1709 (16299) ADK
install the IOT Core packages in version 1709 (16299) IoT Core Packages
install the DragonBoardUpdateTool x86 or x64

sample to create a image for the ipanm7:

  1. start IoTCoreShell.cmd in your KuK_Myon_BuildEnvironment
  2. first time setting up the code signing environment call „InstallOEMCerts.cmd“
  3. call „buildpkg all“
  4. call „buildimage ipanm7 test“ to create a image for a ipanm7 or „buildrecovery iPANM7RecoverySample test“ tp build a image with recovery feature
  5. image you can find at „KuK_Myon_BuildEnvironment\Build\arm\ipanm7\test“
  6. turn on Forced_USB_Boot (SW201) on ipanm7 and connect it to your pc with a micro-usb-cable
  7. call DragonBoardUpdateTool and select the flash.ffu and press Program to split the ffu
  8. select the rawprogram0.xml and press Program to flash the image
  9. turn off Forced_USB_Boot (SW201) on ipanm7 and reboot it


full image deploy guide for ipanm7: Deployment Guide
full image creation guide: Image Creation Guide
full documentation of the adk-addons ADK-Addon options

old releases

service/winiot/bsp.txt · Zuletzt geändert: 2017/11/14 12:20 von