All updates for Windows Embedded CE 6.0 require the following:
1) Platform Builder 6.0 is installed on the machine.
2) Upon installing the update, the platforms must be rebuilt.
Please download the file(s) most appropriate for your installation, as follows:
This package will install
all updates directly to the build environment specified by the original Platform
Builder installation. This is specified by the following registry key:
HKLM\Software\Microsoft\Platform Builder\6.00\Directories - "OS Install
Dir". By default, a backup of all updated files
will be maintained at the following location: %_WINCEROOT%\Updates\Backup.
You can remove any files from this directory at your choosing. 1. If you have trouble installing package on Windows Vista,
open command prompt, choose "Run as administrator", confirm UAC prompt, launch
an update. 2. Making changes to the update files or rebuilding
the public tree changes file CRC values. These files might be reported as
"corrupted" by CEUpdateCheck tool as CRC values will not match the updates'
database entries.
If you have installed previous updates, this package will update your build environment to include the latest files for this
component. If this message is displayed, it means that you have
an update installed with a later version of the files then those that are being
installed. You
already have the updates mentioned in this document including some updates released
later. This message is displayed to
prevent accidental overwrite of the latest update to that particular
component. Note: If source files have been modified by a user, they may
not be overwritten by the files provided with the updates if Date Modified of
the files on user's machine is newer. If you uninstall or repair Platform Builder 6.0, you
have to remove corresponding WinCEPBxx.ini file located in %WINDIR%.
Component: COMM
100809_KB2291255 - The IP module calculates a wrong packet header size for
incoming packets.
Component:
CoreOS
100831_KB2390340 - Up/down arrow keys cannot be used to move through the
list in the combo box.
Component: DCOM
100817_KB2249270 - This update addresses a memory leak.
Component: FSD
100810_KB2028545 - Under certain circumstances the files in sub-directory
cannot be accessed.
Component:
FlashLite
100825_KB982918 - This update addresses failure to load movie clips after
65k previous loads, an issue with resolving URLs, drawing an icon to the
ActiveX control window prior to the Flash rendering starting and provides
support for windowless mode.
100831_KB2273553 - This update resolves some input focus related issues
with TextField objects.
Component: Fonts
100818_KB2028842 - This release updates Simsun_2_50.ac3 and
Simsun_2_50.ttc fonts to meet GB2312 requirement. The file(s) with the new source code changes for this component can be
found in the directory %_WINCEROOT%\:
Component:
Kernel
100809_KB2269851 - CreateNewProcHelper() not flushes cache before
switching to a new process.
100813_KB2286508 - Incorrect call stack is recorded by Dr. Watson.
100813_KB2319498 - Registry corruption may occur due to asynchronous
flashing of the registry. The file(s) with the new source
code changes for this component can be found in the directory %_WINCEROOT%\: public\common\oak\inc\pkfuncs.h private\winceos\coreos\nk\mapfile\mapfile.c
Component: RAS
100818_KB2362408 - When Windows Embedded CE 6.0 is configured and used as
a RAS Server, it cannot establish a direct connection with the client device
unless the client sends out the "CLIENT" keyword. The file(s) with the new source code changes for this component can be
found in the directory %_WINCEROOT%\:WinCEPB60-100831-2010M08-Armv4I.MSI For installation based upon Armv4I processors WinCEPB60-100831-2010M08-MIPSII.MSI For installation based upon MIPSII processors WinCEPB60-100831-2010M08-MIPSII_FP.MSI For installation based upon MIPSII-FP processors WinCEPB60-100831-2010M08-MIPSIV.MSI For installation based upon MIPSIV processors WinCEPB60-100831-2010M08-MIPSIV_FP.MSI For installation based upon MIPSIV-FP processors WinCEPB60-100831-2010M08-SH4.MSI For installation based upon SH4 processors WinCEPB60-100831-2010M08-X86.MSI For installation based upon X86-based processors Note:
If
you have installed previous updates
If
you see "Files that will not be installed"
If you reinstall or repair Platform Builder
Fixes
made in this update:
By Component:
public\common\oak\files\simsun.ac3
public\common\oak\files\simsun.ttc
public\common\oak\files\simsun_2_50.ac3
public\common\oak\files\simsun_2_50.ttc
private\winceos\coreos\nk\kernel\loader.c
private\winceos\coreos\nk\hdstub\hdstub.c
private\winceos\coreos\nk\hdstub\hdstub_p.h
private\winceos\coreos\nk\inc\hdstub.h
private\winceos\coreos\nk\inc\kernel.h
private\winceos\coreos\nk\kernel\exdsptch.c
private\winceos\coreos\nk\kernel\ksysdbg.c
private\winceos\coreos\nk\osaxs\dwdmpgen.cpp
private\winceos\coreos\nk\osaxs\targ0\initt0.cpp
private\winceos\comm\tapi\unimodem\dial.c
private\winceos\comm\tapi\unimodem\modem.c